Ref. FB006GP de l’A.C.F. Reims 1948

Ferrari 166 Spyder Corsa #26

Raymond Sommer’s winning mount in the 2nd Coupe des petites cylindrées at Reims-Gueux in 1948. Available as unpainted MSLA kit (€60), painted kit (€75) or Ready to Run with free showcase box (from €150).

Historic pedigree

Victory at Reims-Gueux on 18 July 1948

Built in just nine examples, the Ferrari 166 SC powered by its light-alloy 1,995 cc V12 triumphed over pure single-seaters in the Formula 2 Coupe des petites cylindrées.

Event
35th GP de l’A.C.F. · Reims-Gueux
Date
18 July 1948 (1st — Coupe petites cylindrées)
Driver & Team
Raymond Sommer · Scuderia Ferrari
Real engine
1,995 cc alloy V12 · 130 bhp at 7,000 rpm
Weight & Output
630 kg · 9 chassis built
Race average
26 laps · 203.208 km · 154.714 km/h
Archive photograph of Raymond Sommer driving Ferrari 166 SC #26 at the 1948 Reims Grand PrixEnlarge
Archive · 1948

Raymond Sommer at Gueux

Passing the Champagne circuit pit façades on 18 July 1948.

Original race programme poster for the 18 July 1948 35th GP de l’A.C.F. in ReimsEnlarge
Official programme

35th GP de l’A.C.F. Reims

Period race programme cover (price 50 francs) — Reims 1948.

1:32 Architecture

From unpainted MSLA kit to Ready to Run

Whether you assemble and tune your own racing chassis or select an RTR car presented in its display case, the FastenBelts geometry remains identical.

Ready to Run (RTR) edition

  • Flexible PLA FDM chassis with separate motor pod
  • FastenBelts Slim Line FF050SK motor — 17,000 rpm
  • 9-tooth brass pinion, bronze bearings and plastic-brass gear
  • Spoked wire wheels in aluminium (Mitoos) or matt plastic (Cartrix)
  • FastenBelts transparent display showcase included free
  • Box ref.: FB006 · Small parts, unsuitable for children under 14 years

Kit contents (unpainted or painted)

  • Ultra-lightweight high-detail 3D MSLA resin body shell
  • Separate driver figure, cockpit, headrest and dashboards
  • #26 front grille, coiled bonnet springs and fuel filler cap
  • Brake drums, suspension wishbones and twin exhaust pipes
  • Dedicated flexible PLA FDM chassis with motor pod and guide
  • Note: 2.38 mm (3/32") axles and bearings not included in body kit alone
Complete contents of the FastenBelts Painted Kit ref. FB006 Ferrari 166 Spyder CorsaEnlarge
Painted Kit · FB006

Complete labelled painted kit

Clear-coated body, cockpit, suspension, exhausts and PLA chassis bagged individually.

Raw unpainted 3D MSLA resin body shell of the Ferrari 166 SC #26Enlarge
MSLA Resin

Lightened 3D resin body shell

Open bonnet louvres and fine wall sections ensure a low centre of gravity.

Black flexible PLA FDM chassis fitted with independent motor pod and axlesEnlarge
PLA Chassis

Independent 4-point motor pod

Flexible PLA chassis carrying the removable 4-screw cradle and 3/32" bronze bushings.

Underside of the RTR car showing the engraved FastenBelts Slim Sport 17 motor and long guideEnlarge
RTR Drivetrain

FastenBelts RTR underside

Engraved FF050SK 17,000 rpm slim motor, inline gear, long guide and copper braids.

Workshop prices · Ref. FB006

Six transparent formulas

Packing & postage: European Union €6 for kits (free for RTR cars); United Kingdom €10 for kits and €5 for RTR models.

Raw MSLA kitref. UK

Unpainted Kit

60 €

Unpainted resin body shell, detailed cockpit, fine accessories and PLA chassis with motor mount.

  • MSLA resin body & detail parts
  • PLA chassis + pod + guide
  • Ready to paint and motorise
Factory paintedref. PK

Painted Kit

75 €

Complete kit with Corsa red painted body and #26 race numbers applied in the workshop.

  • Painted & clear-coated body
  • PLA chassis + pod + guide
  • Running gear sold separately
Mechanical packref. MKPL

Running Gear Pack · Plastic Wheels

29 €

Complete running gear set to finish your kit with classic matt plastic wire wheels.

  • 17,000 rpm motor, wires & eyelets
  • 2.38 mm axles, brass bearings, 9t pinion
  • Cartrix wheels + 20×6 / 21×6 tyres
Alu mechanical packref. MKAL

Running Gear Pack · Alu Wheels

44 €

Competition running gear package featuring machined aluminium wire wheels.

  • 17,000 rpm motor, pinion & spur gear
  • 2.38 mm axles & brass bearings
  • Mitoos Alu wheels + 20×6 / 21×6 tyres
Ready to Runref. RTR-pl

Ready to Run · Plastic Wheels

150 €

Hand-assembled, painted and track-tuned model with matt plastic wheels in its free display case.

  • Complete workshop assembly
  • FastenBelts 17,000 rpm slim motor
  • Display box + free EU shipping
Competition RTRref. RTR-al

Ready to Run · Alu Wheels

165 €

Flagship Ready to Run version equipped with aluminium wire wheels and free display showcase.

  • Machined aluminium wire wheels
  • Flex chassis + separate motor pod
  • Display box + free EU shipping

Running Gear Pack breakdown (MKPL / MKAL)

Includes eyelets, silicone lead wires, 17,000 rpm slim line motor with fixing screw, 9-tooth brass pinion, plastic-brass crown gear with screw, 2.38 mm axles, brass bearings, 20×6 mm front and 21×6 mm rear tyres, plus Cartrix matt plastic (MKPL) or Mitoos aluminium (MKAL) wire wheels.

Order by e-mail

Parts list & Setup

20 recommended mechanical parts for your kit

Proven 2.38 mm (3/32") components recommended to complete or tune your chassis. FastenBelts parts pair directly with standard Slot.it, NSR, Mitoos and Cartrix hardware.

No.Part ref.DescriptionMakerType
01CH41CMotor fixing screwSlot standardStandard
02NSR4843Competition long guide bladeNSRStandard
03NSR-4824Ultra-flexible silicone wire & eyeletsNSRStandard
04FF050SKSlim Sport 17 motor — 17,000 rpmFastenBeltsStandard
05CX1165TX05 Z8 16,000 rpm motor (pinion + gear)CartrixOption
06W9049SlimLine 18,000 rpm 1.5 mm shaft motor + pinionOEM / CompatibleOption
07LMENG132050DHVSlim Line 21,800 rpm motor with 10t pinionOEM / CompatibleOption
08SI-PI559O159-tooth Inline pinion (Ø 1.5 mm shaft) ×2Slot.itStandard
09SI-PI5510O1510-tooth Inline pinion (Ø 1.5 mm shaft) ×2Slot.itOption
10SI-GI27AL27-tooth aluminium Inline spur gearSlot.itStandard
11GI26AL26-tooth aluminium Inline spur gearSlot.itOption
12SI-PA01-48Ground hardened axle Ø 2.38 mm — 48 mm ×2Slot.itStandard
13M183Bronze bushings 3/32" (Ø 2.38 mm) ×2MitoosStandard
14SI-PA57Set screw and lightened gear hub ×2Slot.itStandard
15M02616.6×6 mm aluminium classic wire wheels ×2MitoosStandard
16CX1030MBMatt plastic classic wire wheelsCartrixOption
17M074Grooved rear tyres 21×6 mm ×2MitoosStandard
18M071Slick rear tyres 21×6 mm ×2MitoosOption
19M073Grooved front tyres 20×6 mm ×2MitoosStandard
20M070Slick front tyres 20×6 mm ×2MitoosOption

Visual inspection

Studio photography & macro close-ups

3D CAD modelling

High-resolution digital renders

High-resolution 3D CAD render front three-quarter view of the Ferrari 166 SC #26Enlarge
3D CAD · Front 3/4

Full digital bodywork study

Studio canopy lighting revealing the sculpted nose curvature and front grille.

3D CAD left side profile of the Ferrari 166 Spyder Corsa #26Enlarge
3D CAD · Profile

1:32 overhang & stance check

Wheelbase, ground clearance and cockpit cut-out geometry verification.

High-angle 3D CAD render showing louvered bonnet and #26 race numbersEnlarge
3D CAD · High angle

Bonnet symmetry & cockpit cut

Louvre array placement and accurate engine bay trim around the front screen.

Rear-quarter 3D CAD render showing wooden wheel, twin exhausts and filler capEnlarge
3D CAD · Rear

Tail section & cockpit fittings

Central mirror, wood-rimmed wheel and twin exhaust exit geometry.

Overhead zenith 3D CAD view displaying overall body plan and track widthsEnlarge
3D CAD · Plan view

Track width & weight distribution

Top-down symmetry and internal clearance check for the slim-line motor pod.

Track-level frontal 3D CAD render highlighting front grille and guide bladeEnlarge
3D CAD · Front low

Ground clearance & forward guide

Low frontal stance with forward guide pocket and slatted radiator grille.